How To Plan For Your New Bathtub Installation

How To Plan For Your New Bathtub Installation

You may be under the impression that replacing your old shower or bathtub requires major renovations, but it doesn’t have to. You can choose from all sorts of snazzy models with features for less than what you would expect. And if there are things about them that don’t meet up to standards in terms of design preferences then just do another complete bathroom remodel instead. Regardless, these improvements will look great once they’re finished and offer a good return on investment.

When To Start Planning

It’s never too early to start planning for your next big renovation. Bathtub and shower installations can be installed right over the top of existing fixtures, which means you don’t need a major tear-out job – saving time in the long run as well!

A lot of people think that once their bathtub or showers reach an end stage it’s just protocol to replace them but you don’t have to wait for a tub to reach its end before you start thinking of a replacement.

No matter what your reasons are for wanting to remodel or install a new bathtub, there is more than one way of going about it. But, you need to consider the following first.

Will The New Tub Fit Through The Door?

Bathtubs are big. And if you’re in the market for a walk-in tub, they are even bigger.  A standard size tub will work for most, but for anyone struggling with mobility restrictions, a specialized tub can really make a huge difference to their quality of life.

On the other hand, the luxury of an oversized two-person model might be more your speed if space is at a premium.

Consider what your options are and how much space you have. – and obviously how big your front door is. The first prize is getting a new tub into your bathroom without having to break a piece of wall to do it.

in this busy modern world of ours. As long as there are no obstacles like doorways or closets blocking it from coming into bathrooms where they’re installed after walls and floors have been completed (a common occurrence), then replacing old equipment should not pose any problems.

For a simple replacement job, there are many sectional shower enclosures and tub surrounds on the market that can often be difficult to distinguish from one-piece units.

bathtub-installation

Larger Model Tubs Require More Plumbing

When you’re in the market for a new bathtub, don’t forget to consider factors such as plumbing and hot water heaters. If your home has standard half-inch supply pipes, an extra deep tub will be difficult or time-consuming to fill.  Instead, three-quarter-inch lines make filling much easier.

Equally, hot water tanks are not unlimited and you should always ensure that you have enough capacity for the size of a bathtub. Pairing an 80-gallon tub (or larger) with anything less than a 50 or 75-gallon heater will result in lukewarm baths, so make sure to pair up!

Will The Floor Handle The Extra Weight?

Before installing an oversized bathtub in your home, you need to consider whether the floor can support its weight. It’s one thing to fantasize about having a spa-like experience in the comfort of your own home, but a different matter when you start to fill up the tub and suddenly hear the floor creaking.

Local Regulations

Installing a new bathtub or shower is not always easy, but you will want to make sure that your work complies with local regulations. Your contractor may require an installation permit in some cases so be on top of those details early!

Don’t forget these things can vary between cities too which means you have to get in touch with a local expert.

About the author

Remodeling Specialist administrator